The J2534 program usage procedure involves logging into GSW, downloading and installing the J2534 program, connecting the Passthru device between the OBD and PC, selecting the device, collecting ROM ID, and proceeding with the upgrade if applicable. After upgrading, confirm the final ROM ID, clear DTCs, and complete additional tasks. If no upgrade is available, a notification appears. For inquiries, email ics@gitauto.com with vehicle details.
J2534 Program Usage Procedure
GSW Login and J2534 Access-Log in to GSW and access the J2534 program.
Step 1: Log in GSW and get to J2534
Step 2: Explanation of Supported H/W, S/W and move on the next
Program Download and Installation
Step 3: Download and extract the J2534 program, then install it.
Step 4: Run the program after installation is complete.
Passthru Device Connection
Step 5: Connect OBD ↔ Passthru Device ↔ PC.
Step 6: Use the same account as GSW and AASRA.
Step 7: Explain vehicle pin arrangement and precautions.
Passthru Device Selection and ROM ID Collection
Step 8: Select the Passthru Device connected to the PC.
Step 9: Collect the ROM ID and check if it is a target.
Upgrade Process
Step 10: If it is a target, check the ROM information and proceed with the upgrade.
Post-Upgrade Additional Tasks
Step 11: After the upgrade is complete, an IG Key off message will be displayed.
Step 12: Confirm the final ROM ID.
Display Additional Task Messages and Completion
Step 13: Display additional task messages such as DTC clearing and learning value clearing and complete the upgrade.
If No Upgrade Available
Step 14: If there is no upgrade target, a message-There is no related event-will be displayed.
Inquiries
For related inquiries, please submit a request. When filing a request, please be sure to include the following information:
- Your country
- Automobile Maker
- Vehicle model
- Model Year
- Powertrain(Engine or Battery)
- ROM ID and part number of the ECU
- Upgrade target notification
Comments
0 comments
Article is closed for comments.