[KIA]KDS 2.0 User Manual

Download User Manual zip file as your language with the below.

Here is the English User Manual in detail.

Please select the feature you want to see.

--------------------------------------------------------------------------------------------------------------------

BasicOperation  ModuleConnection  DigitalFieldFix  SmartDiagnosis

ExpertDiagnosis  Fault Code Searching  DataAnlysis  MultiDataAnlysis 

ActuationTest  SWManagement SystemIdentificatio ECU Upgrade

OBD-II MyService Hardware Measurement RecordedData

--------------------------------------------------------------------------------------------------------------------

BasicOperation

: This section provides description on basic operation.
 

ModuleConnection

: Explanation of the VCI II, GDS VCI, TPMS module connection (pairing).
 

MyService

: You can directly access useful websites.
 

SmartDiagnosis

: This function provides comprehensive diagnosis results on the selected vehicle’s system.
You can check various functions such as the presence/non-presence of fault codes, ECU upgrade target status and ECU mapping check, etc. at once.

 

ExpertDiagnosis

: In Expert’s Diagnosis, the user can use diagnosis function, special function and utility function provided by KDS 2.0.
 

Fault Code Searching

: It searches fault code(s) of one or multiple number of systems mounted on the vehicle. The users can check detailed information related to fault codes that are searched, as well as maintenance information.
 

SmartDiagnosis

: This function provides comprehensive diagnosis results on the selected vehicle’s system.
You can check various functions such as the presence/non-presence of fault codes, ECU upgrade target status and ECU mapping check, etc. at once.
 

DataAnlysis

: This function allows various types of control modules mounted on the vehicle to confirm the parameter values, which control the sensor’s signal input and movement of actuators, through vehicle communication.
 

MultiDataAnlysis

: This function is similar to Sensor Data Diagnosis, which supports the analysis of each sensor item of multiple controllers mounted on the vehicle on a single screen at the same time.
* It only supports modules that support CAN communication protocol.

ECU Upgrade

: The purpose of this function is to upgrade data on the ECU(electronic control unit ) to improve the vehicle performance or correct a known issue. 

ActuationTest

: This is a function of performing forced self-driving and stopping various actuators installed on vehicles through a control module, which can inspect the normal driving status of parts.
 

SWManagement

: This supports functions such as additional settings after vehicle repair, test or initialization, etc.
The supported items are varied depending on vehicle type, and caution should be paid for vehicle condition.
 

SystemIdentification

: It shows specification information of the controller (part number, H/W, S/W, etc.) mounted on the vehicle.
 

OBD-II

:  OBD-II mode is used to display generic vehicle powertrain diagnostic data. The vehicle communication protocol is automatically determined when OBD-II mode is selected.
 

DigitalFieldFix

: This provides a function of checking the controller prior to repair of the vehicle or operation status of the vehicle parts. Supported items vary depending on the selected vehicle, and attention shall be paid to the vehicle conditions.
 

Measurement

: This function uses VMI prediction module to measure the actual 
waveform of the sensor and actuator, and uses simulation function to 
diagnose the vehicle.
 

RecordedData

: You can view the data saved in tablet PC, and also copy the driving data 
saved in VCI II.