Jeong, DJ TSC GIT
- Total activity 448
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 371
Articles
Recent activity by Jeong, DJ TSC GIT-
Download and Insallation Failure with Smart Launcher - GDS Smart & KDS 2.0
We have been experiencing recent cases of download and installation failures. GIT is currently investigating the root cause and solution for these issues, which are caused by unstable server connec...
-
How to Update Firmware of VCI 2 and VCI 3 in GDS Smart
How to update firmware of VCI 2 and 3 manually Path: Run GDS Smart > Configuration > Device Manager > Select VCI II or VCI III > Update Once firmware update is getting started after tapping ...
-
Error code occurred during ECU upgrade (Failed(Code: Rule Worker Changing FW Mode Failed: ECU_UPGRADE_CAN))
1. The symptom : ECU Upgrade fails with a message "Failed(Code: Rule Worker Changing FW Mode Failed: ECU_UPGRADE_CAN)" 2. Cause : Firmware split 3. Workaround In case the above workaroun...
-
Noise(Special) Inspection Failure by force shutdown
FAQ – App Force Close Issue Q1. What is the symptom? The app shuts down by force when trying to access certain functions. Q2. What is the cause? The issue occurs when the microphone permission is n...
-
Noise(special) Inspection Failure with a message "No events exist for this vehicle"
1. Symptom: Inspection fails at first stage(verifying vehicle) with a message "No events exist for this vehicle". 2. The Current Workaround: Please find both "iNVHEvent.sqlite" and "Thresholdversio...
-
Noise(special) Inspection Failure with Error Code 0A-3
1. Symptom: Failed Noise Inspection at final step(measurement) with error code 0A-3.2. Cause: Error code 0A-3 indicates if noise is measured under min Decibel(㏈).3. Current Workaround: Ensure that ...
-
[Video Guide] How to use High Voltage Battery Pack Connector Check
Please refer to the video below and proceed in order. * You can change the video quality in [Settings-Quality] on the right side of the YouTube screen. * To enlarge the screen, press the [Full Sc...
-
Error code occurred during ECU Upgrade (5021-10-7F7F)
Symptom: While ECU upgrade 1450 is in progress, error code [5021-10-7F7F] is found with upgrade failure. Cause: An IBU reprogram Mode NRC has occurred due...
-
How to get ECU logs from your tablet on GDS Smart/KDS2.0
How to get ECU logs from your tablet on GDS Smart/KDS2.0 1. Please Click "My FIles" on your tablet. 2. Please goto "Internal storage \ NvciData\ log", you will find "ecu" folder. Select...
-
Precautions When Connecting VCI3 Wirelessly (For Customers Using Galaxy Tab S5e, Android 14 or Later Tablets)
We would like to inform you of precautions when connecting VCI3 wirelessly. 1. Usage environment:- Diagnostic app: GDS Smart, GENESIS Smart, KDS 2.0- Diagnostic tool: VCI3 - Tablet PC Galaxy Tab S5...