Symptom: While ECU upgrade is in progress, error code [0012-00-0000]
Cause: Failed to send data when requesting to start ECU upgrade from tablet to VCI
Resolution:
1. Remove the VCI installed on the OBD and re-install it.
2. After reconnecting the tablet and VCI, retry the ECU upgrade.
3. If the countermeasure above don't help, please submit an error log report referring [Further Resource] below.
[Further Resource]
What to Do When ECU Upgrade Fails
How to send the error log report on GDS Smart/KDS2.0
How to get ECU logs from your tablet on GDS Smart/KDS2.0
In case the above workaround doesn't resolve the issue, please contact your distributor.
Comments