Error code occurred during ECU upgrade (0013-00-0000)

Symptom: ECU upgrade in progress, error code [0013-00-000]

Cause: The error code occurs when the ECU upgrade AUTO MODE determines the target and the ROM ID check communication fails.

Resolution:

1. If there is no history of ECU upgrade, it is necessary to connect the diagnostic device and check the normal display of the sensor output of the target controller.
2. If there is a history of failure by performing ECU upgrade, ECU recovery is required by ECU upgrade through manual mode.

[Further Resource]

What to Do When ECU Upgrade Fails

How to send the error log report on GDS Smart/KDS2.0

How to get ECU logs from your tablet on GDS Smart/KDS2.0

In case the above workaround doesn't resolve the issue, please contact your distributor or GIT assistance at following email for further support.