Skip to main content

GDS Smart RND for Labs: Installation and Upgrade Guide

Oscar Eom
Updated

About This Guide

The update service for legacy GDS Mobile has been officially terminated. To ensure continued technical support, access to advanced diagnostic features, and compatibility with new vehicle models, all RND labs must upgrade to the GDS Smart (4th generation) platform. This guide provides the step-by-step instructions to install and activate GDS Smart strictly in a research and development lab environment.

Looking for a different GDS Smart variant?

This article specifically covers the GDS Smart RND for labs version. If you are looking for installation guides for other GDS Smart environments, please refer to the specific articles below:

  • GDS Smart for Mobis
  • GDS Smart for CV+PV (Commercial & Passenger Vehicles)
  • GDS Smart for Industry

Hardware and Software Requirements

Before proceeding with the installation, verify that your lab equipment meets the following minimum requirements. Please note that iOS devices are not supported for GDS Smart.

  • Tablet Device: Samsung Galaxy Tab S7 or higher
  • Operating System: Android 12 or later
  • Memory (RAM): 6GB or more
  • Storage Space: Minimum 64GB (128GB or more is highly recommended for RND data logging)

Step-by-Step Installation Process

Follow these instructions to successfully transition from GDS Mobile to GDS Smart (4th Gen):

  1. Submit VCI II Information: Locate the serial number on your VCI II device. Send an email containing this serial number to the official support channel at sale2@gitauto.com to initiate the lab transition process.
  2. Obtain the License Key: The GIT sales and support team will verify your hardware and issue a unique GDS Smart license key assigned to your RND lab.
  3. Download the Software: Use the secure download link provided by the support team, or scan the QR Code below to download the Smart Launcher (installer) to your designated tablet.

    GDS Smart Download QR Code

  4. Install and Activate: Open the downloaded file and complete the installation. Launch GDS Smart, connect your VCI II, and enter your new license key when prompted to activate the diagnostic features.

Installation Guide Video

🛠️ Customer Support

For questions or technical support related to GDS Smart, please contact us via the emails below.

Related articles

Comments

0 comments

Please sign in to leave a comment.