※ Images and names may differ depending on the region and manufacturer.
How to connect VCI2 or VCI3 to GDS Smart / GENESIS Smart / KDS2.0.
1. Press [Preferences] at the bottom of the main screen.
2. Tap [Device Manager].
3. Connect VCI II Module to the vehicle’s OBD-II Connector to support power, and proceed
the following process
4. Touch VCI II tab of the Device Manager
5. Search VCI II to connect through [ ] icon.
6. Check the serial number of VCI II to connect, and select it
7. Check PIN CODE, and enter it.
8. VCI II connection is in progress.
9. VCI II connection is completed.
If the device is not detected or a pairing, communication, or power error occurs during connection, please refer to the VCI II(2) Troubleshooting - Connection, Firmware, Power, Communication & Repair Guide.
Comments
0 comments
Article is closed for comments.