Oscar Eom

Symptom During ECU Upgrade, error code 4900-01-0000 occurs. Cause This error code indicates a pre-procedure failure and occurs due to Ethernet socket connection failure. How to Resolve Please ch...

Symptom During ECU upgrade, error code 5100-07-0001 occurs. Cause This error code indicates a Rule Ready failure.The integrity verification of the internal data required for the upgrade has faile...

SymptomDuring ECU Upgrade, the error code 7000-10-7F11 occurs.CauseThe detailed code of this error, 7F 11, means serviceNotSupported.It indicates that the server (controller) does not support the r...

This guide explains how to update the Google Play System on a Samsung tablet. Google Play system updates are separate from Samsung One UI (OS) updates. They are ...

This feature automatically displays previously saved fault code search (FCS) results when re-entering the function, enabling comparison before and after maintenance. It activates if the VIN, model ...

This article addresses situations where the ECU upgrade stops at 0–5% and error "7000-31-7F10" occurs. Possible causes include unmet Ethernet routine conditions or temporary communication interrupt...

This guide explains how to use the 'Duty Output' mode in the VMI3 simulation function to forcibly operate the vehicle's Purge Control Solenoid Valve (PCSV) and check for individual actuator defects...

This guide explains how to use the 2-channel independent ground method provided by the VMI3 to simultaneously measure the waveforms of four injectors using only two physical channels, and how to co...

This guide explains how to use the VMI3 to measure the AC voltage ripple at the battery terminals and how to quickly check the mechanical compression pressure balance of each engine cylinder withou...

This guide explains how to use the Dual Display function of the GDS Smart VMI3 to measure the voltage of the Engine Coolant Temperature Sensor (ECTS), and how to output a simulated voltage signal f...