Navigation Bar

[Passenger Vehicle] How to install GDS Mobile/KDS

Before you begin

* Before you install GDS mobile/KDS, you have to install PC Manager previously.

      How to install PC Manager<- click here.

      How to install PC Manager by USB<- click here.

 

 

* Check if your PC manager is 4.00 or higher.( If not, please kindly contact ics@gitauto.com.)

0.jpg

 

Procedure

1. Run PC Manager and click PC Manager Internet update.

2.jpg

 

2. Click "Download".

3.jpg

 

3. When it is complete, click "Close" button.

4.jpg

 

4.  Connect the tablet PC to the PC vis USB cable.

 

5. Click "Login" button.

5.jpg

 

6. Log in PC Manager with GSW ID and PW.

(If you don't know the GSW ID and PW, click here[Hyundai] [KIA].)

6.jpg

 

7. Click "GDS Mobile/KDS program Installation".

7.jpg

 

8. Select the tablet PC you want to install PC Manager on.

8.jpg

 

9. Read the instruction on PC Manager carefully. Then, when you are ready, tab "Start" button.

 9.jpg

 

10. The installation data is transferred to the tablet PC. Wait for a while.

10.jpg

 

11. After the data transfer is complete, go to "My files" on tablet PC.

1.jpg

12. Go to [Device storage-Download] and click "GITMInstaller.apk" to install.

2.jpg

 

13. Tap "Setting" button.

3.jpg

 

14. Activate "Unknown sources".

4.jpg

 

15. Tap "OK" button.

55.jpg

 

16. Tab "INSTALL" button.

66.jpg

 

17.  The program is being installed.

7.jpg

 

18. Tab "ACTIVATE" button.  

8.jpg

 

19. Tab "Next" button.

* If you don't connect WiFi to the tablet PC, it may not work properly. Check internet connection.

9.jpg

 

20. Read the information carefully and mark the box. Then tab "CONFIRM". 

10.jpg

 

21. GDS Mobile/KDS is installed.

11.jpg

[Note]

During installation, you may see the message as 'This app was built for an older version of android and may not work properly' if Android version is higher than Android 10.

Just press the 'OK' button.

Related FAQ : https://support.gitauto.com/hc/en-gb/articles/360053476114

 

22. When the installation is complete, GDS Mobile/KDS program runs automatically.

Enter the information correcly.

12.jpg

* If you have the notice, you already install GDS mobile on other tablet PC.

Add: If you want to use  GDS Mobile/KDS not only on this tablet PC but also other tablet PC , tab "Add" button.

Change: If you want to use GDS Mobile/KDS only on this tablet, tab "Change" button. GDS Mobile/KDS on other tablet PC cannot operate.  

13.jpg

 

23. Installation is complete. You may it use after the adminitrator allow you to use it. Wait up to 24 hours. 

14.jpg

* If you are urgent to use it, send the information below to ics@gitauto.com.

  1. Maker : Hyundai or Kia
  2. Dealer or distributor ID
  3. VCI serial No.
  4. Tablet WiFi MAC address  : Path - [Setting-General-About device -Status ]

 

 16.jpg

* Make sure!

    Depending on each region and maker, the images as below may be different from yours.

 

 

 

 

 

 

Have more questions? Submit a request

Comments

Article is closed for comments.