[Commercial Vehicle] How to install GDS mobile on tablet PC.

Before you begin

* Before you install GDS mobile/KDS, you have to install CV PC Manager previously.

How to install PC Manager by USB

* Check if your PC manager is 4.0 or higher.( If not, please kinldy contact ics@gitauto.com.) 

Procedure

1. Run PC Manager and click PC Manager Internet update.

2.jpg

 

2. Click "Download".

3.jpg

 

3. When it is complete, click "Close" button.

4.jpg 

4. Connect the tablet PC to the PC vis USB cable.

 

5. Click "Login" button.

5.jpg

 

6. Log in PC Manager with GSW ID and PW.

(If you don't know the GSW ID and PW, click here[Hyundai] [KIA].)

6.jpg

 

7. Click "GDS Mobile/KDS program Installation".

7.jpg

 

8. Select the tablet PC you want to install PC Manager on.

8.jpg

 

9. Read the instruction on PC Manager carefully. Then, when you are ready, tab "Start" button.

9.jpg

 

10. The installation data is transferred to the tablet PC. Wait for a while.

10.jpg

 

11. After the data transfer is complete, go to "My files-Device storage-Download" on tablet PC.

Then, click "Next" button on the PC Manager.

1.jpg1.png

 

12. Go to [Device storage-Download] and click "GITMInstaller.apk" to install.

2.jpg

 

13. Tap "Setting" button.

3.jpg

 

14. Activate "Unknown sources".

4.jpg

 

15. Tap "OK" button.

55.jpg

 

16. Tab "INSTALL" button.

Then, click "Next" button on the PC manager.

66.jpg

 2.png

17. APK is being installed. Please wait for a second. 

7.jpg

18. Tab "Open" button on tablet PC.

Then, click "Next" button on PC Manager.

13.png

3.png

 

19. Tab "ACTIVATE" button on tablet PC.

Then, click "Next" button on PC Manager.

8.jpg

 4.png

 

20. Tab "Next" button on tablet PC.

* If you don't connect WiFi to the tablet PC, it may not work properly. Check internet connection.

9.jpg

 

21. Read the information carefully and mark the box. Then tab "CONFIRM".

10.jpg

 

22. Restart the tablet PC and unlock the screen.Then, click "Next" button on PC Manager. 

5.png

* If you have the Notice below, please kinldy reconnect the USB cable from the PC.

6.png

 

23. Input the information below.

7.png

 

24. Double check if the CV adator and VCI II serial number is correct. These serial numbers register as a pair.

8.png

 

* If you have the notice below, click here.

8_1.png

 

* If you registered the VCI II before, you will have the notice below. pleae kinldy click "Add" button.  

 9.png

 

25. Read the notice carefully click "OK" button.

10.png

 

26. Data is being transferred.

11.png

 

27. After the data transation is compklete, GDS Mobile/KDS will be installed automatically.

11.jpg 

 

28. Installation is complete. You may it use after the adminitrator allow you to use it. Wait up to 24 hours. 

14.jpg

* If you are urgent to use it, send the information below to ics@gitauto.com.

  1. Maker : Hyundai or Kia
  2. Dealer or distributor ID
  3. VCI serial No.
  4. CV adapter Serial No.
  5. Tablet WiFi MAC address : Path - [Setting-General-About device -Status ]

 

16.jpg

* Make sure!

Depending on each region and maker, the images as below may be different from yours.

 

 

 

 

 

 

Have more questions? Submit a request

Comments

Article is closed for comments.